HD 1080P OLED 1800nits Brightness 0.49" Micro Display Module For AR Glasses
Product Description
This display is a 0.49 inch diagonal, 1920(RGB) × 1080 dots active matrix color OLED module based on single-crystal
silicon transistors.
This module integrates panel driver and logic driver, and realizes small size, light weight, low power consumption and high resolution.
Product Details
| Resolution |
Full-HD 1920*1080 |
| Display Material |
OLED |
| Screen Size |
0.49" |
| Quantity |
2 screens, binocular |
| FOV |
41° |
| Brightness |
1800 nits |
|
Contrast Ratio
|
50000:1
|
| Frame Rate |
60Hz~90Hz
|
|
Interface
|
MIPI
|
Features
- High resolution
- Large FOV
- High brightness
- Plug and play
- Light and small
- Ultra high contrast
- Wide color gamnt
- Fast response speed
Interface
I2C Interface
The I2C-bus is for bi-directional, two-line communication between different ICs or modules.The two lines are the Serial Data Line (I2C_SDA) and Serial Clock Line (I2C_SCL). Both lines mustbe connected to a positive power supply via pull-up resistors. Data transfer can be initiated only whenthe bus is not busy. The acknowledge takes place after every byte. The acknowledge bit allowsthe receiver to signal the transmitter that the byte was successfully received and another byte maybe sent. The master generates all clock pulses, including the ninth acknowledge clockpulse.
